Talk to a Bama Tuning Experience Specialist Here Free Tunes for Life
In-House Dynos • Award-Winning Customer Service

What Parameters Do I need to Datalog (05-10 ALL)

2005-2010 V6/GT/GT500:

Please select the following PID's/DMRS (do not select any SAE (OBD) parameters) and ensure Rapid Pack Datalogging is selected



  • Intake Air Temperature
  • Intake Air Temp2 F (only applies to GT500)
  • Engine Coolant Temperature



  • Long term fuel trim bank 1
  • Long term fuel trim bank 2
  • Short term fuel trim bank 1
  • Short term fuel trim bank 2


FUEL PUMP (Cars w/ Aftermarket Fuel Pumps Only or Forced Induction)

  • Actual Voltage at Pump
  • Fuel Pump Voltage from Table
  • Pressure Drop Accross Fuel Injectors
  • Returnless Fuel Pump Duty Cycle
  • X Axis Input Value For Returnless Voltage Table
  • Y Axis Input Value For Returnless Voltage Table



  • Idle Air Integrator
  • ISC Learned Correction No AC



  • MAF Volts
  • MAF Flow Rate lb/min (#/min)



  • Battery Voltage
  • RPM
  • Load
  • Vehicle Speed MPH
  • Throttle Position Absolute
  • Torque Source


Knock Sensor

  • Knock Sensor Voltage 1 and 2



  • Spark Advance V2
  • Knock Sensor Retard
  • Spark Source


Transmission (only applies to AT equipped vehicles)

  • Gear Commanded
  • Torque 
  • Line Pressure KPA
  • Torque Converter Slip
  • Torque Converter Clutch Commanded
Have more questions? Submit a request

Can't find what you're looking for? Message a Tuning Experience Specialist