Talk to a Bama Tuning Experience Specialist Here Free Tunes for Life
In-House Dynos • Award-Winning Customer Service

What Parameters Do I need to Datalog (99-04 Mustang ALL)

99-04 V6/GT/Cobra:

Please select the following PID's/DMRS (do not select any SAE (OBD) parameters) and ensure Rapid Pack Datalogging is selected.  03-04 Cobra's require an aftermarket wide-band air-fuel gauge hooked up or dyno with wideband in the exhaust (preferably before the catalytic converter).

 

NOTE: X4's may not work properly on these vehicles.

 

Environment:

  • Intake Air Temp
  • Intake Air Temp2 F (only applies to 03-04 Cobra)
  • Engine Coolant Temperature

 

FUEL

  • Long term fuel trim bank 1
  • Long term fuel trim bank 2
  • Short term fuel trim bank 1
  • Short term fuel trim bank 2

 

FUEL PUMP (only required for supercharged vehicles/vehicles with fuel pump upgrades)

  • Actual Voltage at Pump
  • Fuel Pump Voltage from Table
  • Pressure Drop Accross Fuel Injectors
  • Returnless Fuel Pump Duty Cycle
  • X Axis Input Value For Returnless Voltage Table
  • Y Axis Input Value For Returnless Voltage Table

 

 IDLE

  • Idle Air Integrator
  • ISC Learned Correction No AC
  • Idle Speed Valve Duty Cycle

 

MAF

  • MAF AD Counts
  • MAF Flow Rate lb/min (#/min)
  • Load

 

MISCELLANEOUS

  • Battery Voltage
  • Engine Speed
  • Throttle Position Absolute
  • Vehicle Speed

 

SPARK

  • Spark
  • Spark Source
  • Knock Sensor (only applies to 99-01 Cobra)
Have more questions? Submit a request
Follow

Can't find what you're looking for? Message a Tuning Experience Specialist